Could plants help produce the minerals used in batteries, electronics, wind turbines, and other modern technologies? It sounds unlikely. Yet some plants can absorb extraordinary amounts of metal from the soil and concentrate it in their leaves and stems.
Scientists call the process phytomining, or agromining when the plants are deliberately cultivated as metal crops.
I became interested in this idea while reading about concentrated critical-mineral supply chains. China plays a major role in refining several important materials, particularly rare earth elements. However, the picture varies by mineral: Indonesia leads nickel refining, while other countries are major sources of mined ores.
That distinction matters. Growing a plant that absorbs nickel does not automatically create a battery-ready product. The metal still needs to be recovered, purified, and processed.
So, can plants make a meaningful contribution to mineral supply? The research suggests a qualified yes for certain metals and locations. However, the possibilities differ sharply between nickel and rare earth elements.
Quick Summary: What Phytomining Can and Cannot Do
- Phytomining uses plants to collect metals from soil. Researchers then harvest and process the metal-rich biomass.
- Nickel has the most developed commercial evidence. Researchers report operating metal farms and promising field results.
- Rare-earth phytomining remains less mature. Ferns and other plants can accumulate rare earth elements, but recovery costs and yields remain important barriers.
- Plants do not replace refining. Harvested biomass must be converted into usable metal, compounds, or other products.
- Environmental benefits are site-specific. Energy use, chemicals, soil nutrients, land management, and contaminated biomass all matter.
- Not every metal-tolerant plant is a hyperaccumulator. Plants used for pollution cleanup may have little value as commercial metal crops.
- Phytomining is a possible supplementary source. Current evidence does not show that it can replace conventional mining or an entire mineral supply chain.
Why Critical Mineral Supply Chains Attract Attention
Critical minerals are materials considered important to economic activity or essential technologies and vulnerable to supply disruption.
Nickel and cobalt are used in some battery chemistries. Lithium is another battery material. Rare earth elements such as neodymium and praseodymium are important for certain permanent magnets.
However, these materials are not interchangeable. Different minerals require different extraction, separation, and refining methods.
The International Energy Agency reports that China is the leading refiner of many key energy minerals, while Indonesia leads nickel refining.
It also reports that rare-earth refining became somewhat less concentrated between 2023 and 2025, following production increases in Malaysia and the development of new projects in the United States.
Nevertheless, processing capacity remains concentrated for several materials.
Read the IEA Global Critical Minerals Outlook for the distinction between mining, refining, and downstream manufacturing.
What Is Phytomining?
Phytomining uses the ability of certain plants to absorb metals through their roots and concentrate them in harvestable tissues.
Some species can tolerate metal concentrations that would harm ordinary plants.
These unusually metal-rich plants are called hyperaccumulators.
However, absorbing a metal is only the first step. A commercially useful plant must also grow well, produce enough biomass, and allow the target metal to be recovered economically.
Researchers may cultivate these plants on naturally metal-rich soils, disturbed land, or selected mine-affected sites.
They then harvest the shoots and leaves. Depending on the process, the biomass may be dried, heated, or chemically treated before the metal is recovered.
The result may be a concentrated intermediate material known as bio-ore rather than immediately usable metal.
How Does Phytomining Work?
1. Identify a Suitable Site
Researchers first test the soil for the target metal, its chemical availability, acidity, and other important conditions.
A site with substantial total nickel does not necessarily contain nickel that plant roots can readily absorb.
Likewise, highly contaminated soil may be too hostile for a useful crop.
2. Select the Right Plant
Different plants accumulate different elements.
A species that concentrates nickel may not be suitable for rare earths. Local climate, soil chemistry, and potential ecological impacts also influence the choice.
Researchers must distinguish true hyperaccumulators from ordinary plants that merely tolerate contaminated soil.
3. Grow and Harvest the Biomass
As a suitable plant grows, it may transport the target metal from its roots into its leaves and stems.
Harvesting removes some of that metal from the site.
However, a plant that stores most of the metal in its roots may be less useful for a process based on harvesting above-ground tissues.
4. Recover the Metal
Harvested plants are not ready-to-use battery or magnet materials.
Processors must separate the target element from water, organic matter, other metals, and impurities.
Heating can produce metal-rich ash. Additional chemical processing may then recover a saleable metal or compound.
The processing route is a major part of the environmental and economic equation.
Why Nickel Is the Strongest Phytomining Example
Nickel has attracted decades of research because some plants accumulate remarkable concentrations of it.
A peer-reviewed review titled Agromining of Nickel: Finally Becoming a Reality at Commercial Scale describes companies operating metal farms around the world.
That is an important advance beyond laboratory experiments.
However, the same researchers caution that some earlier commercial claims relied on unrealistic yield expectations.
Nickel agromining works only when the plant, soil, climate, harvest, and recovery process fit together.
Furthermore, a viable specialty operation is not equivalent to supplying the full volume of nickel required by the global battery and stainless-steel industries.
A Real Metal Farm in Malaysia
One well-studied example uses Phyllanthus rufuschaneyi, a nickel-hyperaccumulating plant grown in Sabah, Malaysia.
Researchers established a tropical metal farm on naturally nickel-rich ultramafic soil.
Field work demonstrated substantial nickel concentrations in the plant’s above-ground tissues.
However, soil nutrients, growing conditions, and the recycling of nickel through fallen leaves also influence the system.
A study of the farm found that sustained harvesting could reduce soil calcium stocks. That is one reason researchers must monitor nutrient balance rather than assume repeated harvests are automatically sustainable.
Read the research on nickel cycling in the Sabah metal-farming system.
The Nickel Plants Worth Knowing
Odontarrhena muralis
This nickel-hyperaccumulating plant appears in older research under the name Alyssum murale.
It is among the plants studied for growing metal-rich biomass on suitable soils.
Botanical names can change as researchers revise plant classifications. Kew’s Plants of the World Online lists Alyssum murale as a synonym of Odontarrhena muralis.
Phyllanthus rufuschaneyi
This tropical species is a prominent example of nickel agromining in Malaysia.
Its suitability depends on local soils and climate. It should not be assumed that it would perform equally well on an unrelated site.
Berkheya coddii
This South African nickel-hyperaccumulating plant has also been investigated for metal recovery.
However, evidence from a particular species or growing region cannot be generalized to every metal crop.
Other Odontarrhena Species
Researchers have studied several related nickel-accumulating species, including plants associated with metal-rich soils in southeastern Europe.
Correct species identification matters because closely related plants can differ in their ability to accumulate nickel.
Can Plants Also Mine Rare Earth Elements?
Yes, certain plants can accumulate rare earth elements. However, rare-earth phytomining is not at the same stage as nickel agromining.
Rare earth elements are a group of chemically related elements, not one single metal.
Recovering them from plants requires more than measuring a high concentration in leaves.
Processors must handle mixed elements, separate useful products, and control costs.
A recent paper in Communications Earth & Environment describes rare-earth phytomining as a potential supplementary source while identifying insufficient biomass yields and difficult recovery processes as major commercial barriers.
Read Phytomining of Rare Earth Elements From Soils Using Plants.
Dicranopteris linearis: An Important Rare-Earth Fern
One especially interesting plant is Dicranopteris linearis, a fern found in tropical and subtropical regions.
Researchers have measured substantial rare-earth concentrations in its leaves.
The plant can also regenerate after harvesting, which may make repeated collection possible under suitable conditions.
However, reported yields vary with the site, and the fern is not a universal solution for every climate or rare-earth deposit.
Furthermore, its usefulness depends on which rare earth elements it collects and how efficiently processors can recover them.
The strongest evidence supports further field development. It does not establish that commercial rare-earth metal farms can already replace conventional production.
What About Pokeweed and Other Rare-Earth Plants?
Phytolacca americana, commonly called pokeweed, has also attracted research interest for rare-earth accumulation.
However, it is a toxic plant, and its possible use as a metal crop raises important questions about safe handling and environmental management.
Other ferns, including Blechnopsis orientalis, have been investigated for rare-earth recovery.
These species differ in biomass production, geography, and the elements they accumulate.
Consequently, researchers need site-specific testing rather than a universal list of plants said to absorb every valuable mineral.
Could New Processing Technology Make Rare-Earth Phytomining More Practical?
Researchers are testing improved ways to recover rare earth elements from harvested plants.
One experimental approach uses rapid electrothermal calcination to heat rare-earth-rich biomass for a very short period before extraction.
A published study reported extraction efficiencies of up to approximately 97% under its experimental conditions.
However, that figure describes the study’s processing result. It does not mean that 97% of the rare earths in an entire field were commercially recovered.
Nor does it establish that the process has already been deployed as a large industrial supply chain.
Read the study of rapid electrothermal calcination for rare-earth phytomining.
Phytomining Is Not the Same as Phytoremediation
Phytomining aims to recover an economically useful material.
Phytoremediation uses plants to manage or reduce environmental contamination.
The two approaches can overlap, but their goals are not identical.
For example, a plant may help limit the spread of a toxic contaminant without accumulating enough valuable metal to justify commercial recovery.
Likewise, a plant may capture a hazardous substance that must be handled as contaminated waste rather than sold as a useful mineral product.
That distinction is especially important when discussing lead and arsenic.
Sunflowers, Indian Mustard, and the Limits of Lead Extraction
Sunflowers and Indian mustard are often mentioned in discussions of contaminated-soil cleanup.
Researchers have studied their ability to take up several metals under different conditions.
However, they should not automatically be classified as dependable, commercially useful lead-hyperaccumulator crops.
Lead often remains associated with roots or soil, and moving enough of it into harvestable shoots can be difficult.
A critical review concluded that convincing lead phytoextraction remains substantially more challenging than popular descriptions suggest.
Therefore, I would not place sunflowers in the same commercial category as established nickel metal crops.
Read the review of lead phytoextraction and phytostabilization.
Chinese Brake Fern and Arsenic
Pteris vittata, sometimes called Chinese brake fern, is notable for its ability to accumulate arsenic.
That makes it important to research on contaminated soil.
However, arsenic removal is generally a pollution-management problem rather than a route to producing a valuable battery mineral.
Moreover, the arsenic-rich plant material must be handled safely after harvest.
This is another example of why an impressive metal-accumulating plant is not necessarily a commercial mining crop.
Could Phytomining Improve Damaged Land?
Metal crops may offer useful options on selected disturbed or metal-rich sites.
Vegetation can help cover exposed soil and reduce some erosion and dust problems.
In suitable circumstances, harvesting metal-rich biomass may also remove part of the target element from the upper soil.
However, this does not mean that a site is automatically cleaned up when metal-rich plants grow there.
Some contaminants lie below the root zone. Others are difficult for plants to absorb or remain locked in the soil.
Repeated harvests may take years, and contaminated biomass requires proper management.
Phytomining should therefore be evaluated against the site’s actual remediation goals, not assumed to replace every conventional cleanup method.
Is Phytomining Always Greener Than Conventional Mining?
No extraction method has zero environmental impact.
Growing plants may reduce the need for certain forms of excavation at suitable sites.
However, the complete process can still require irrigation, fertilizers, transport, heat, chemical reagents, and waste handling.
Metal-rich ash may contain other hazardous substances.
Also, repeated harvesting can remove nutrients from the soil.
Introducing a nonnative hyperaccumulator could create ecological problems if it spreads beyond the managed site.
Consequently, environmental claims need a full life-cycle assessment.
A favorable laboratory result does not establish that every commercial phytomining project has a smaller carbon footprint or lower water use.
Why Rare-Earth Phytomining Is Still Economically Difficult
Commercial viability depends on how much saleable material an operation can produce relative to its full costs.
That includes land management, planting or natural regeneration, harvesting, transport, processing, and safe disposal of residues.
Rare earths create an additional challenge because the harvested material can contain many chemically similar elements and other impurities.
Some researchers are investigating whether metal-rich biomass can be converted directly into specialty materials rather than fully separated into individual rare-earth products.
However, a product that works as a catalyst or other specialty material is not automatically a substitute for the purified metals needed in permanent magnets.
Different end uses require different purity and manufacturing specifications.
Could Plants Reduce Dependence on Concentrated Mineral Suppliers?
Phytomining could add another source of certain metals where the geology, climate, and processing infrastructure make it practical.
However, the technology cannot solve every part of a mineral supply chain.
For example, producing nickel-rich ash does not create a complete battery manufacturing industry.
Likewise, collecting rare earths in fern leaves does not provide the separation facilities, alloys, and magnet factories required for finished products.
The IEA identifies processing and downstream manufacturing as important constraints even where new mining projects are being developed.
Therefore, phytomining is most accurately described as a possible supplementary extraction method.
Its contribution will depend on which metals can be recovered, at what scale, and at what environmental and financial cost.
What Would Researchers Need to Prove Next?
For nickel, the next questions concern repeatable yields, long-term soil management, commercial economics, and ecological safeguards.
For rare earth elements, researchers must demonstrate reliable field production and efficient processing beyond laboratory conditions.
Both fields also need clear accounting for energy use, water, chemicals, and the fate of contaminated biomass.
Species conservation is another consideration. Some hyperaccumulators grow in specialized habitats, and collecting wild plants indiscriminately could harm the populations researchers hope to study.
I would also want to see projects report the actual quantity and quality of the saleable product, not just impressive concentrations measured in leaves.
Frequently Asked Questions About Phytomining
Can plants really extract metal from soil?
Yes. Some species absorb metals through their roots and concentrate them in harvestable tissues. Recovering a usable product requires additional processing.
Which metal is closest to commercial phytomining?
Nickel has the most developed evidence, including field operations described in peer-reviewed research.
Can plants produce rare earth elements?
Some plants accumulate rare earth elements. However, growing enough biomass and recovering suitable products economically remain major challenges.
Can sunflowers clean up lead-contaminated soil?
Sunflowers have been studied for phytoremediation, but reliable lead removal is difficult. Their performance depends on soil conditions, where the lead accumulates, and safe biomass handling.
Does phytomining eliminate the need for chemical processing?
No. Most routes still require processing to separate the target metal or produce a usable compound.
Is phytomining automatically carbon-neutral?
No. Its environmental performance depends on the full process, including cultivation, transport, heating, chemicals, and waste management.
Could phytomining replace conventional mining?
Current evidence supports a supplementary role for selected metals and sites, not wholesale replacement of conventional mining.
The Bottom Line
The science of phytomining is real, and nickel metal farms demonstrate that the idea has moved beyond laboratory experiments.
However, the opportunity is highly specific to the metal, plant species, soil, climate, and recovery process.
Rare-earth-accumulating ferns are scientifically promising. Nevertheless, they do not yet provide a demonstrated replacement for industrial rare-earth extraction and refining.
I also would not assume that every metal-absorbing plant is useful for commercial mining or that every plant-based operation is environmentally preferable.
The most convincing projects will report actual metal output, processing costs, ecological effects, and long-term soil conditions.
For now, phytomining is best understood as an additional tool for selected mineral resources, with important unanswered questions about scale and sustainability.
On a separate personal note, if you are ever visiting Santa Barbara, California, I would be happy to welcome you to my downtown Riktr PRO Massage studio for an in-call appointment. My massage practice is unrelated to the mineral-recovery research discussed here.
Book an in-call massage appointment with me in Santa Barbara.
In-Call Massage Only @ my Artistic PRO Sports Massage Studio @ 827 State St., Suite 20, Text ONLY for appointments: 805-637-7482
Riktr PRO Massage: Injury Recovery
Standard Mon - Fri: $150/hr
(Save $45 - Mon-Fri)
Weekends & Holidays: $175/hr
📍 827 State St, Suite 20, SB 93101
View on Google MapsFirst-time clients: A $25 deposit is required to hold your appointment time and is applied to your session.
Book Online NowOr Text: 805-637-7482
Location and Reviews
Find PRO Massage on Google Maps

*Disclaimer:
This information is for educational purposes only and is not a substitute for professional medical advice, diagnosis, or treatment. This is not medical advice, and you should always consult your primary care doctor or a qualified healthcare provider regarding any specific health problem or disease. Nearly 2 decades of therapeutic bodywork experience provide a clinical perspective, but individual results may vary, and specific outcomes are not guaranteed. Clinical bodywork involves intense physical manipulation; it is the reader’s responsibility to ensure they are healthy enough for such activity and to disclose all medical conditions to their provider. The decision to act on any information provided is the sole responsibility of the reader. All trademarks and brand names referenced are the property of their respective owners.

